4 EASY STEPS TO CONNECT YOUR LED STRIP LIGHTS
LED strip light (also known as an LED tape or rope light) is a flexible circuit board populated by surface mounted light-emitting diodes (SMD LEDs) and other components that usually comes with an adhesive backing. Traditionally, strip lights had been used solely in accent lighting, backlighting, task lighting, and decorative lighting applications. Increased luminous efficacy and higher-power SMDs have allowed LED strip lights to be used in applications such as high brightness task lighting, fluorescent and halogen lighting fixture replacements, indirect lighting applications, Ultra Violet inspection during manufacturing processes, set and costume design, and even growing plants.
THINGS NEEDED FOR INSTALLATION
Step 1: Take Measurements and Make Cuts
Measure the length of where the LED strip will applied to, then cut the strips to length with sharp scissors in order to prepare them for the quick installation process ahead.
Note: LED strips can only be cut along the clearly marked lines that are evenly spaced.
Step 2: Connecting two lengths of LED strips with strip-to-strip connector
Connect the pointed side of the pin to the strip light (NB. It should be very firm)
Step 3: Strip-to-Power Connection
Connect the other side of the pin to the portal of the adaptor (NB. It should be very firm and fit into the four holes of the portal perfectly)
Connect to the power source
Step 4: Turn on the Lights!
The last step is the easiest, but also the most fulfilling step in the whole process. Now all you have to do is plug in the power supply, turn up with remote to the brightness level of your choice and enjoy your new LED lighting!
Connect with us on WhatsApp or Call on :
+233 (0) 555-312-011 | +233 (0) 240-882-266 | www.rhemaengineering.com | email@example.com | firstname.lastname@example.org
Follow us on: